1·The rubber matrix can be styrene butadiene rubber matrix or butyl rubber matrix.
其中的橡胶基体可以为丁苯橡胶基体或丁基橡胶基体。
2·Styrene butadiene rubber (SBR) was cyclized with the aid of cationic catalyst system based on diethylaluminum chloride(Al) and benzyl chloride(RCl).
应用一氯二乙基铝和苄基氯催化剂体系进行了丁苯橡胶的阳离子环化反应。
3·Features: able to endure the erosion of oil-resisting and non-polarity solvent heat isolation is better than the natural rubber and styrene butadiene rubber.
能抗耐油和非极性溶剂的腐蚀，耐热性能比天然胶、丁苯胶好。
4·Styrene butadiene rubber production wastewater was treated by the coagulation-catalytic oxidation process with PAC and PAM as coagulants and H2O2-O3 as oxidants.
以聚合氯化铝（PAC）、阴离子聚丙烯酰胺（PAM）为混凝剂，以H2O2-O3为氧化剂，采用混凝—催化氧化法处理对丁苯橡胶生产废水。
5·It is simple, speed, highly selective method and it has already been satisfactorily appling to the determination of bound styrene content in the carboxylated styrene butadiene rubber latex.
本方法简单、快速、选择生强，已成功地应用于羧基丁苯胶乳中结合苯乙烯含量的测定。
6·The research situation and the progress of continuous polymerization technology of home and abroad for high vinyl solution polymerized styrene butadiene rubber (SSBR) were reviewed in this paper.
综述了国内外高乙烯基连续溶聚丁苯橡胶(SSBR)的研究现状及其聚合技术进展。
7·Solution polymerized styrene-butadiene rubber ( S-SBR ) was fractionated by repeated precipitation method, using redistilled toluene as solvent and ethyl alcohol as precipitant.
本工作用甲苯作溶剂，乙醇作沉淀剂，用沉淀分级法，对溶聚丁苯橡胶（S-SBR）进行了分级。
8·Synthetic rubber is a copolymer of butadiene (75%) and styrene (25%).
合成橡胶是丁二烯（75％）和苯乙烯（25％）的共聚物。
9·The application tests showed that the properties of the styrene-butadiene rubber filled with modified HCC are good and modified HCC has a broad application prospects.
在丁苯橡胶中的应用试验显示，改性重质碳酸钙充填丁苯橡胶的性能良好，其应用前景广阔。
10·A brief introduction of the technical innovation of butadiene evaporation unit is given in the article. During the expansion of the SBR(Styrene - Butadiene Rubber) plant of Qilu Petrochemical Corp.
主要介绍了在齐鲁石化橡胶厂丁苯橡胶装置改扩建工程中对丁二烯泄料系统的技术改进。